Home > News > Content

The Surface Treatment Process Of Metal Hair Clip

The surface treatment process of Metal Hair Clip
 In general, the Metal Hair Clip products, color and surface texture decoration, in the Metal Hair Clip molding can be completed, but, in order to increase the life of the product, improve its aesthetics, the general surface of its secondary processing, a variety of Decoration processing.
Metal Hair Clip products surface treatment methods are:
1. Surface machining. The effect is to make the surface smooth, bright, beautiful; the use of means of scrub, polishing and so on.
2. Surface plating treatment. The effect is decorative, landscaping, anti-aging, corrosion-resistant; used by means of finishing, printing (screen, transfer, printing), foil, hot stamping and so on.
3. Surface decoration treatment. The effect is to make the surface wear-resistant, anti-aging, metallic luster, beautiful; the use of means of thermal spraying, plating, ion plating and so on.
A scrub
Generally refers to the Metal Hair Clip film or sheet, in the calendering molding, the roller itself is a variety of lines, through the different lines to reflect the transparency of the material.
Polished
Polishing refers to the use of mechanical, chemical or electrochemical role, so that the workpiece surface roughness reduced in order to obtain bright, flat surface processing methods. Principle with the principle of rubbing shoes, with paraffin oil, kerosene stained toothbrush evenly coated Metal Hair Clip, volatile day, with silk (such as socks) around the pull in the Metal Hair Clip surface back and forth to wipe, and then sun can be.
3. Finishing (spraying)
Metal Hair Clip spray is mainly in the metal equipment or parts coated with a layer of Metal Hair Clip, play anti-corrosion, wear, electrical insulation and so on. Spray processing of raw materials required for spherical powder.
Effect: coloring, get different texture, to prevent Metal Hair Clip aging, corrosion resistance.
Metal Hair Clip spray process: annealing → degreasing → eliminate static electricity and dust → spray → drying.
Four
Plastic printing is a process that prints the desired pattern on the surface of a plastic piece. It can be divided into screen printing, surface printing (printing), hot stamping, infiltration printing (transfer) and etching printing.
1. Screen printing
The plates are reticulated, and the ink on the printing plate is printed on the substrate from the perforations of the plate through the squeeze of the wiper blades. Usually the screen is made of nylon, polyester, silk or metal mesh.
3) Metal Hair Clip signs; 4) soft, hard metal hair clips; 5) Metal Hair Clip clip the application of the scope: 1) ABS Metal Hair Clip; 2) electronic products, Instrument panel; 6) color polyester plate.
The pattern of the polycarbonate shell is screen printed. Exquisite effect, full color and color.
2. Pad printing
The pattern is first etched on the printing plate, the etching plate is coated with ink, and then most of the ink is transferred to the object to be printed by the silicone head.
Hot stamping
Is a method of melting the adhesive on the film by pressure and heat and transferring the metal film plated onto the film onto the Metal Hair Clip. Effect similar to the film method, you can beautify the product appearance, to convey product information.
4. Transfer
Water transfer: is the use of water pressure will be with a color pattern transfer paper / Metal Hair Clip film for a polymer hydrolysis of a printing.
Thermal transfer: is a pattern or pattern printed on the heat-resistant adhesive tape, by heating, pressure, the ink layer pattern printed on the finished product on a technology.